Autel MaxiDiag MD806 Pro Car Diagnostic Tool OBD2 Scanner Diagnosis All Systems


SKU: 129473311013888 Category:


Products Description

Autel MaxiDiag MD806 Pro
The Autel Maxidiag MD806 pro scanner is a Combination of Autel MaxiCheck Pro and the Autel Maxidiag Elite MD802. The MD806 Pro diagnostic scanner is an excellent tool for car repair shop owners, professional mechanics, and DIYer enthusiasts. It may not be a high-level diagnostic scanner, but neither is it an entry-level scanner. Autel MD806 PRO is a full system diagnostic scanner that can quickly establish a data link to the electronic control units of the vehicle being serviced directly.

Autel MD806 Pro Features:
1. Autel MD806 Pro All System Diagnoses

* Guide Directly to the Fix and Eliminate Guesswork, MD806 PRO allows you to:

1. ) Retrieve ECU information of tested control units including unit type, version numbers, and other specifications;
2. ) Read & Erase DTCs to locate problem areas and clear the codes easily;
3. ) View live data of each parameter item;
4. ) Get access to all vehicle systems and subsystems, such as Engine; Automatic Transmission; Suspension; Audio; IMMO Immobilizer; Air Conditioning; Auto Headlamp; ACC; Car Radio Audio; Car Door Windows etc. To perform a comprehensive scanning process on ECUs to locate the faulty systems and retrieve the DTCs related.
5.) Read and clear trouble codes for Special Function

2. Autel MD806 Pro Designed with full OBD2 Functions
1. ) Read & clear detected diagnostic trouble codes and turn off the Check Engine Light;
2. ) Read I/M readiness status to have a vehicle inspected for state emissions compliance;
3. ) View graphical live data of vehicle’s computer module(s) for easy analyses;
4. ) View the vehicle’s operating parameters at the moment a DTC is detected;
5. ) Show the last results of the O2 sensor test in the graphic display for troubleshooting;
6. ) Read the results of on-board diagnostic monitoring tests for specific components/systems;
7. ) Component Test: Allow initiating a leak test for the vehicle’s EVAP system;
8. ) Retrieve the vehicle information of VIN, CINs, and CVNs completely.

Oil Reset – When the oil change operation is completed, using this car scanner to rest the system is needed so it can calculate when the next oil change is required.
EPB Service – It has a multitude of uses to maintain EPB, including deactivating and activating the brake control system,assisting with brake fluid control, etc.
SAS Service – It can be used to effectively perform calibration for the Steering Angle Sensor, and clear fault memory.
DPF Service – It allows you to clear the blockage through the continuous burning of the particulate matter captured in the DPF filter.
BMS Service – With this function, you can perform a reset on the vehicle battery for clearing the fault information and re-match the battery.

Throttle Matching – It enables you to initialize the throttle actuators so that the “learned” values stored on ECU are returned to the default state.
Adjust A/F – It helps adjust the air-fuel mixture properly and directly to protect the engine performance from being decreased.

Compatible vehicles:
Asian car:
For Acura, Daewoo, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Scion, Subaru, Suzuki, Toyota
European car:
For Audi, Abarth, Alfa Romeo, BMW, Bentley, Benz, Bugatti, Citroen, Dacia, EU Ford, Fiat, Jaguar, Lancia, LandRover, Mini,Maybach, Opel, Peugeot, Porsche, Renault, Seat, Skoda, Saab, Smart, Sprinter, Vauxhall, Volkswagen, Volvo
American car:
For Chrysler, Ford, GM

Autel MD806 Pro Supports Muti-Language
Englsih, French, German, Spanish, Portuguese, Swedish, Italian, New Zealand, Polish, Swedish, Russian, Traditional Chinese, Japanese

MaxiDiag MD806 Pro Specifications

ARM® Thumb® Processor running at up to 400 MHz
32MB, 166 MHz
4.0 inch LCD with 800×480 resolution
Mini USB: 2.0 Micro SD Card (16GB)
Power Consumption
1.7 W
Operating Temperature
-10°C to 60°C (14°F to 140°F)
Storage Temperature
-20°C to 70°C (-4°F to 158°F)
Operating Humidity
5% – 95% non-condensing
Strong plastic housing with protective rubber boot
202 mm x 92 mm x 35 mm (8.35” x 3.62” x 1.4”)
313 g (0.69 lb.)

Additional information




There are no reviews yet.

Be the first to review “Autel MaxiDiag MD806 Pro Car Diagnostic Tool OBD2 Scanner Diagnosis All Systems”

Your email address will not be published.